MILKIT
MILKIT | Ref: MKDT

MilKit Tubeless Rim Tape


_MilKit Tubeless Rim Tape | MKDT | Greenland MX_

Details

https://www.greenlandmx.eu/en/milkit-tubeless-rim-tape/MKDT.html
MILKIT
MILKIT | Ref: MKDT

MilKit Tubeless Rim Tape


Personalized
Customer Service
Pay Less
Get More
Club GMX
Exclusive Discounts
MSRP 17,95€ | You save 1,45€
GMX Price -8%
16 , 50
VAT Included
- +

Description
Technical details
Ratings
Size guide

MilKit Tubeless Rim Tape

Rim tape strong and reliable for an airtight fit, but with enough flex to make installation quick and easy.

Rim tape is needed to ensure air does not escape through holes that are drilled in the rim for spokes.

Choose a rim tape width that matches the inner width of your rim or is slightly larger. The rim tape should cover the whole rim base and it can even cover a part of both sides. Using too narrow rim tape can lead to air leaking between rim and tape – which can be frustrating. If it is too wide it can interfere with the tire seating correctly.

For easy and effective installation:

  • Clean rim thoroughly and ensure it is dry.
  • Install rim tape by pulling it firmly into the rim. It must be tight and ensure there are no gaps or air trapped underneath.
  • Make sure it overlaps at least 10cm/4 in over the valve hole, it’s better to have a longer overlap than shorter.
  • Use two layers for high pressure wheels (above 8 bar / 120 psi).
  • Cut rim tape at a 45° angle for the best adhesion and flexibility.
  • Install milKit tubeless valves into rim: pinch just a small hole into the rim tape and push valve through tape into rim.
  • 10m/11yd rolls – sufficient to set up 4-5 wheels.
Brand MilKit
-

This article does not have a size guide. If you have any questions, please contact us at info@greenlandmx.com

We will be happy to assist you!

You may also like…

About the brand

Last visited products

  • €17,95 €16,50