Husqvarna Repair Kit-Glue 56 g.

Husqvarna Repair Kit-Glue

The repair kit is a two-component epoxy resin adhesive, hardens at room temperature: accelerated hardening possible by raising the temperature.

• Particularly suitable for steel, but also other metals, wood, concrete, ceramics, glass and most plastics.
• The steel bond is resistant to, among other things, oil, gasoline, diesel and battery acid.
• Best results are achieved with clean and rough surfaces. Cut off the required amount and knead for approx.
• 1 minute until a uniform color is achieved. Process within 2 minutes.
• Initially, there does not appear to be any adhesion, but the kit should continue to be pressed on to the surface.
• Remove any excess material.
• When coating or repairing surfaces that are still wet, leak or are under water, apply pressure until adhesion begins.
• Smooth flat with water by hand for an even surface.
• Wash your hands with soap and water (or with a Turbo cleaning towelette) immediately after completing your work.
• Hardening commences after 5 to 10 minutes.
• The repaired part can be used again after as little as 60 minutes.
• The surfaces to be glued must be dry and free from dust and grease.
• Contents: 56 g.